SHAKE-OUT FEEDERS

Impressions of the

trade fair GIFA 2015

News

T Branchen Foundry Steel Pit and Quarry Industries
Type CAH shake-out feeders are used in automatic molding plants with or without molding boxes to continuously separate molds and sand. They are suitable for a wide range of different moldings with differences in cast-sensitivity. These shake-out feeders operate with high frequencies from 1,000 to 1,500 rpm with a gravitational acceleration of 4.5-5.0 g. Depending on the casting program the feeders are fitted with a lengthways or traverse grid or perforated plate. An exciter type CRE is usually used for the drive placed in the middle, above or underneath the machine. This configuration ensures that maintenance work can even be conducted from above. Shake-out feeders are specified based on the size of the molding and the conveying capacity. It varies from 800 to 3,000mm in width and 4,500 to 7,500mm in length. In case of casting programs producing a wide range of different products, a shake-out feeder “Vario” type CAV should be used.
Conveyor Belts
Products
“Vario”

Brochure

Impressionen der  GIFA 2015   News